Turn the lateral plate from the CTP plate-making machine 90 ° into the processor which can reduce the width and cost, both with the function of machine bridge and to coordinate the height and speed difference between the processor and plate-making machine. One CTP plate-making machine can be connected to three processors through the conveyor at the same time, improving the overall efficiency.

 

 
1. Continuously variable speed in two directions, adaptability.
2. Pneumatic lift plate, light and fast
3. Two-stage height adjustment, meet the height difference between
    the processor and plate-making machine.
4. Automatically determine the position of the
    plate to avoid the overlapping plate into the processor.
1. Two or three directions to connect the
    processor model.
2. Determine the plate size and send plates by
    the size.
3. Accept orders of special specifications or
    special requirements.
 

 

Model SZ-LTP860 SZ-LTP1200 SZ-LTP1650
Max.plate width 860×1100mm 1200×1500mm 1425×1650mm
Min.plate length 400×220mm 400×220mm 400×220mm
SPEED 0-6.5m/min 0-6.5m/min 0-6.5m/min
Overall dimensions (L×W×H) 1645×1300×950mm 1911×1700×950mm 2450×1900×950mm
POWER 1Φ220V/2A 50/60Hz